|Dimensions||18 × 12 × 3 in|
With V-Mount for the 1×1 Daylight Panel (FP1x1DPS-V $119.00), With G-Mount for the 1×1 Daylight Panel (FP1x1DPS-G $119.00), With V-Mount for the 1×3 Daylight Panel (FP1x3DPS-V $139.00), With G-Mount for the 1×3 Daylight Panel (FP1x3DPS-G $139.00)
Daylight Drivers (G1)
$119.00 – $139.00
The Daylight Drivers are available for the 1×3 and 1×1 LED DP Lumi light panels. You can choose from either G-Mount or V-mount options.
*Please note the 1×3 Drivers does require a 30V Battery. 1×1 can use the standard 14V battery.
The DP Lumi Surface-Eggcrate is designed to go directly onto our LED panels. They are made from a sturdy, yet flexible cloth material and helps control the spread of light. It stops the light from spilling over adding directional control and keeping your light focus on your subject.
The Telescoping Pipe Clamp is designed for use with our light weight LED Light fixtures weighing no more than 25 lbs.(11.4kg.) Engineered to telescope from the grid with nominal ceiling clearance. Telescoping Pipe Clamps are for both temporary and permanent placement of lighting fixtures. Constructed of aluminum with internally welded safety collars and cast aluminum [...]
Our Softbox-Mount Eggcrate is designed to be mounted directly on our 1X1 and 1X3 flexible panels and around our 3x3 frames. This narrows the light beam to 40 degrees, while maintaining the full, un-diffused intensity of the light. This keeps the focus of the light on the subject and prevents it from spilling into the lens or background.
This Heavy Duty 5/8 Swivel Pin adds articulation to your light stand giving you the option to turn you lights horizontally, vertically or facing up and down. One end slips onto a male 5/8" pin while the other supports our light panels with a 5/8" receiver. The ball joint allows 180° swivel of the fixture, while the large, rubber-covered T-handle provides secure locking in your chosen position. The barrel at the receiver end measures 1 1/8". Removing the tightening knob from it allows you to drop it into a 1 1/8" receiver.
The Softbox are designed to be mounted around our 1X1 and 1X3 flexible panels and our 3x3 frames.This lightweight, reflective element can be easily fastened directly to the light panel using the "hook and loop" strips, to create a softbox. This effectively creates a calculated distance between the light and the layer of diffusion, which yields evenly spread, soft lighting. The softbox also serves as a mounting surface for an eggcrate.